LabHoodsExperts technician in a hazmat suit decontaminating a laboratory fume hood in Alberta
Alberta Lab Decontamination Specialists

Laboratory Decontamination Services for Alberta Labs

When a fume hood, biosafety cabinet, or ductwork holds something dangerous, you need people who have done it before. We neutralize perchloric acid, clean up mercury and heavy metals, and decontaminate biosafety cabinets for universities, hospitals, and research labs across Alberta, safely, and with the paperwork to prove it.

OSHAANSI / AIHA Z9.5
ASHRAE 110Tested & Certified
FullyLicensed & Insured
Scroll
Before Fume hood duct interior before decontamination — white perchloric acid residue build-up
After Fume hood duct interior after decontamination — residue fully removed and cleared
Biosafety cabinet ready for decontamination service in an Alberta lab
Why Choose Us

Labs call us when the job can't go wrong

A dry perchlorate crystal in an old duct can go off like a firecracker. A missed mercury bead can fail a clearance test months later. This is not the work you hand to a general cleaning crew. Here is what you get with us.

  • We treat the hazard as the hazard

    Testing first, then a written plan, then the work. We assume the worst is in there until the data says it isn't.

  • You get the documentation

    Clearance certificates, waste manifests, and test reports that hold up with EH&S, your insurer, and the auditor.

  • We show up fast

    Spill, failed certification, or a demolition crew waiting on you? We book Alberta site visits quickly and keep your lab moving.

  • We know Alberta buildings

    Cold-climate makeup air, campus exhaust systems, and older chemistry wings behave differently. We plan for that.

Special Hazards Decontamination

Our Core Lab Hoods Decontamination Services

This is what we do best. When something dangerous is trapped in a fume hood, biosafety cabinet, or duct, these three services get it neutralized, cleaned, and cleared, with proof for your records.

High-Risk ChemicalPerchloric acid fume hood sealed under containment for wash-down decontamination

Perchloric Acid Decontamination

Old perchloric acid hoods build up shock-explosive crystals inside the ductwork. We test for perchlorate, wash down the hood and ducts, neutralize what we find, and hand you a clearance report before anyone touches it for removal or demolition.

Learn more
Heavy MetalsTechnician decontaminating a chemical fume hood contaminated with heavy metals

Chemical & Heavy-Metal Disinfection

Mercury beads roll into seams and stay there. Lead and chemical residue fail clearance tests long after a spill. We do surface testing and vapor monitoring, remove the contamination, and manifest the waste so your lab passes inspection.

Learn more
BiologicalBiosafety cabinet prepared for vaporized hydrogen peroxide decontamination

Biological Hazard Decontamination

Before a filter change, a move, or after an exposure, a biosafety cabinet has to be made safe. We use vaporized hydrogen peroxide (VHP), a 6-log sporicidal clean that leaves almost no residue and gets your cabinet back in service fast, with validation records.

Learn more
More Ways We Keep Alberta Labs Running

Key Fume Hood services and Lab Decommissioning services

Decontamination is the hard part, but a safe lab needs its hoods tested and its old systems pulled out the right way. We do both.

Certified chemical fume hood after ASHRAE 110 performance testing
Category 01

Fume Hood Certification & Compliance

Most fume hoods in Alberta have to be certified every year to stay compliant with OSHA and ANSI/AIHA Z9.5. We test the airflow, prove it contains, label it, and give you the report. If a hood fails, we tell you why and help fix it.

Explore Fume Hood Certification
Fume hood under containment during laboratory decommissioning and ductwork isolation
Category 02

Laboratory Decommissioning & Air Balancing

Closing a lab, renovating a wing, or moving a hood? Old ductwork can hide contamination, and pulling it out changes the airflow for every hood around it. We isolate and dismantle it safely, then rebalance the air so everything still contains.

Explore Decommissioning & Balancing
Built for Alberta Labs

Why this work matters here, in Alberta

Alberta runs some of the busiest chemistry and life-science labs in the country. The University of Alberta and the University of Calgary alone hold hundreds of fume hoods and biosafety cabinets, plus hospital research floors, provincial labs, and energy and environmental testing sites across Edmonton and Calgary. Every one of them has to stay safe and compliant.

Our winters make it harder. When it's minus thirty outside, the makeup air feeding a fume hood shifts, and a hood that passed in September can drift out of range by January. Older campus buildings weren't built for today's exhaust loads. That's the exact gap we fill, local techs who understand cold-climate airflow and Alberta's older lab infrastructure.

Campus labsAging chemistry wings at U of A and U of C need annual certification and safe decommissioning as spaces get renovated.
Cold-climate airflowAlberta winters change hood makeup air. We test and rebalance so containment holds year-round.
Energy & enviro labsHeavy-metal and chemical testing sites around Edmonton and Calgary need real remediation and clearance records.
Fast local responseWe're in-province, so a spill or failed hood doesn't wait days for someone to fly in.

Serving Calgary, Edmonton, Red Deer, Lethbridge, and research sites across Alberta.

Fume hood and acid storage in an Alberta university chemistry laboratory
Questions Alberta Labs Ask

Frequently asked questions

Most labs certify every hood once a year. That yearly check keeps you lined up with OSHA and ANSI/AIHA Z9.5, which is what campus EH&S teams, insurers, and auditors look for. High-use hoods, ductless hoods, and hoods that handle very hazardous work are often checked every six months. If you are not sure what your hood needs, send us the make and model and we will tell you.

Yes. Mercury spills, chemical contamination, and suspect perchloric acid hoods are time-sensitive, so we book urgent Alberta site visits and can talk you through safe first steps over the phone. For an active spill, call us first before anyone tries to clean it up, since the wrong move can spread the problem or fail a later clearance test.

That is one of the most common jobs we do. Old ductwork can hide perchlorate crystals, mercury, or chemical residue. We test first, clean and neutralize what we find, and give you a written clearance report so your demolition crew can pull the hood and ducts out safely. Doing it in the wrong order is where labs get hurt.

Yes. Every job ends with documentation, clearance certificates, test data, certification labels, and waste manifests where they apply. These are built to hold up with your environmental health and safety office, your insurer, and outside auditors. Good paperwork is half of why labs call a specialist instead of a general cleaner.

We are based in Calgary and work with labs across Alberta, including Edmonton, Red Deer, and Lethbridge. Because we are in-province, you are not waiting days for a technician to fly in when a hood fails or a spill happens.

Book a Site Assessment

Tell us what's in the hood

Send a few details and we'll get back the same business day. Not sure what you're dealing with? That's fine. Just describe it and we'll tell you what testing makes sense before anyone commits to anything.

416 Monument PL, Calgary, AB T2A 1X3Serving labs across Alberta

No obligation. We'll never share your details.

Thanks, we've got it

A member of the team will reply the same business day. For an active spill, please call the urgent line.

North American Service Network

Need fume hood support outside Alberta?

Visit Fume Hood Experts – fume hood testing and decontamination across the US and Canada.